Loop-AM3400-B Access DCS-MUX

AM3400-A

AM3400-B

AM3400-C

Features:
  • Support of DS0 DACS (Digital Access Cross-connect System) with full cross-connect
  • Dual controller, dual power (-48V DC) with load sharing
  • 1+1 protection, Y-BOX
  • 1 for 1 protection, E1, T1, FOM
  • PDH ring protection, QE1, QT1, FOM, Mini QE1
  • Console, Telnet, SLIP, SNMP, and Inband management support
  • Craft interface port for connection to external LCD display
  • Compatible to a SNMP based GUI network management system and supported by LoopView and Loop iNMS
  • Mini plug-in card types:
    E1 card
    T1 card
    Mini Quad E1 card
    E1/ T1 ATM Frame Relay card
    32 WAN port Router
    64 WAN port Router-A
    Fiber optical card
    Terminal Server card
    Quad 2W/4W E&M card
    QFXS/QFXO card
  • Single-slot plug-in card types:
    4-channel E1/ T1 card
    6-channel U card
    10-channel U card
    8-channel OCU-DP card
    3-channel MDSL card without line power
    2-channel G.SHDSL card without line power
    4-channel G.SHDSL card without line power
    8-channel G.703 card at 64 Kbps data rate
    8-channel Dry Contact I/O card
    8-channel 2W/ 4W E&M card
    12-channel FXS card
    12-channel FXO card
    12-channel Magneto card
    1-channel low speed optical (C37.94) card
    4-channel low speed optical (C37.94) card
    8-channel RS232 with X.50 subrate card
    8-LAN-port/64-WAN-port Router-B
  • Dual-slot plug-in card types:
    6-channel X.21/V.11 card
    6-channel V.35 card
    6-channel V.36 card
    6-channel EIA530/RS449 card
    5-channel RS232 with X.50 subrate card
    24-channel FXS card
    24-channel FXO card
Description:

The Loop-AM3440-B is an access DCS-MUX that can combine various digital access interfaces into E1 or T1 lines for convenient transport and switching. The Loop-AM3440 Access DCS-MUX provides access for a variety of interfaces, including mini Quad E1, Quad E1/T1, ATM/ FR, 32 WAN port Router, 64 WAN port Router-A, Router-B, FOM, Terminal Server Card, MDSL, G.SHDSL, G.703, U type, X.21/V.11, V.35/V36, RS232, 8RS232, QEM, QFXO, QFXS, 8EM, 12FXS, 12FXO, 24FXS, 24FXO, and Magneto.

Ordering Information

View this page to see order codes (will load slowly) or download specifications sheet PDF


Enter and submit form and we will contact you straight away:

onsubmit="return jcap();" name="AM3420 Request Form">

 Please specify the Brand and Model Number:

* Brand & Model
* Product type (modem, router, etc.)
Part # (if available):
*Qty.
Specs/Features/Description

 *I am the End User Reseller (tax-ID required at time of purchase)

Describe your application requirements with as much detail as possible:   

  Contact  Information - Our Privacy Policy is: We do not sell, trade, give or share information
   provided to us to anyone.

    First Name: Last Name: Title: 
    Company:   Mail Stop:   

    Address:    
    City:            State: Postal Code:  Country:
    Telephone: FAX:   
    Email:         URL:   

Enter the code below as it is shown:

    


 

LOOP-AM3440 Access DCS-MUX Product Specifications

Network Line Interface - T1

Line Rate 1.544 Mbps ± 32ppm Output Signal DSX1w/0, -7.5, -15 dB LBO
Line Code AMI or B8ZS Framing D4/ESF (selectable)
Input Signal DSX-1 0 dB to -30 dB w/ALBO Connector RJ48C
Network Line Interface - E1
Line Rate 2.048 Mbps ± 50 ppm Framing ITU G.704
Line Code AMI or HDB3 Connector BNC/RJ48C
Input Signal ITU G.703 Electrical 75 ohm Coax/120 ohm twisted pair
Output Signal ITU G.703 Jitter ITU G.823
Network Line Interface - Mini 4E1
Line Rate 2.048 Mbps ± 50 ppm Framing ITU G.704
Line Code AMI or HDB3 Connector DB25S
Input Signal ITU G.703 Electrical 75 ohm Coax/120 ohm twisted pair
Output Signal ITU G.703 Jitter ITU G.823
Network Line Interface - 3E1*
Line Rate 2.048 Mbps ± 50 ppm Framing ITU G.704
Line Code AMI or HDB3 Connector BNC/RJ48C
Input Signal ITU G.703 Electrical 75 ohm Coax/120 ohm twisted pair
Output Signal ITU G.703 Jitter ITU G.823
Function Support DS0-SNCP
Network Line Interface - 4E1
Line Rate 2.048 Mbps ± 50 ppm Framing ITU G.704
Line Code AMI or HDB3 Connector BNC/RJ48C
Input Signal ITU G.703 Electrical 75 ohm Coax/120 ohm twisted pair
Output Signal ITU G.703 Jitter ITU G.823
Network Line Interface - 4T1
Line Rate 1.544 Mbps ± 32 ppm Output Signal DSX1w/0, -7.5, -15 dB LBO
Line Code AMI or B8ZS Framing D4/ESF (selectable)
Input Signal DSX-1 0 dB to -30 dB w/ALBO Connector RJ48C
ATM Frame Relay Network Line Interface

Supporting Network Interworking (FRF.5) and service interworking (FRF.8). Network Interface: T1 Module: T1 ATM UNI FR (n x 64 Kbps, n=1 to 24) E1 Module: E1 ATM UNI FR (n x 64 Kbps, n= 1 to 31)

Up to 31 logical FR channels can be concentrated/ de-concentrated to FR or ATM.

Service Ports: T1/FT1 interface: n x 64 Kbps, n=1 to 24 E1/FE1 interface: n x 64 Kbps, n= 1 to 31

Support HDLC to FR Support HDLC to ATM Supporting FR to FR multiplexing. Support up to 128 DLCIs for total of 31 FR interfaces. Support up to 128 VCs. Peak cell rate on DLCI basis. Manufacturing disable/enable ATM scrambling for internal testing (E1 ATM only). AAL0 and AAL5 are supported in the ATM adaptation layer. Support VBR service. ANSI and ITU FR management protocols are supported. Flash memory software download through RS485. Only the PVC type of ATM/FR service is supported.

Router Interface

Number of ports 2 LAN ports, Max. 32 WAN ports Physical Interface 10 BaseT x 1, 10/100 BaseT x 1 Connector RJ45 Routing protocol RIP-I, RIP-II Data Rates Channelized N x 64 Kbps up to T1/E1 capacity Supporting Protocols TCP/IP, PPP, HDLC

Router-A Interface

Number of ports 2 LAN ports, Max. 64 WAN ports, Each WAN port has data rate n x 64K bps, 1 n 32 ( 4Mbps

for total of all 64 WAN ports Physical Interface 10/100 BaseT x 2 Connector RJ45 Routing protocol RIP-I, RIP-II, OSPF, Static Supporting Protocols PPP (IPCP/BCP), MLPPP, HDLC, Frame Relay, and Cisco compatible HDLC, NAT/NAPT, DHCP Diagnostic Ping, Trace route QoS Rate limit

Router-B Interface

Number of ports 8 LAN ports, Max. 64 WAN ports. Each WAN port has data rate n x 64K bps, 1 n 32 (8Mbps for total

of all 64 WAN ports Physical Interface 10/100 BaseT x 8 Connector RJ45 Routing protocol RIP-I, RIP-II, OSPF, Static Supporting Protocols PPP (IPCP/BCP), MLPPP, HDLC, Frame Relay, and Cisco compatible HDLC, NAT/NAPT, DHCP Diagnostic Ping, Trace route QoS Rate limit

Terminal Server Interface

Connector One DB-44 conversion cable to one DB-9 and two DB-25 connectors

Ports One Async RS232 port, two Async/Sync RS232 ports. The two Async/Sync ports can be configured independently as Asynchronous or Synchronous.

Data Rate Async: 1.2kbps, 2.4kbps, 4.8kbps, 9.6kbps, 19.2kbps, 38.4kbps

Sync: 64 kbps Layer 2 Protocol of RS232 Async SLIP or raw data Layer 2 Protocol of RS232 Sync PPP Terminal Server Function Supports Telnet Router Function RIP-I, RIP-II, Static Route

Optical Fiber Interface Characteristics

Optical Module Fiber Direction Wavelength Connector Distance (km) Power (dB) (nm)

SAA Dual uni-directional 1310 SC (Subscriber Connector) 30 20 SBB Dual uni-directional 1310 SC (Subscriber Connector) 50 30 SCC Dual uni-directional 1310 FC (Fiber Connector) 30 20 SDD Dual uni-directional 1550 SC (Subscriber Connector) 20 12 SEE Dual uni-directional 1550 SC (Subscriber Connector) 100 40 SSM

Single bi-directional (master) 1310/1550 SC (Subscriber Connector) 30

20
SSS Single bi-directional (slave) 1550/1310 SC (Subscriber Connector) 30 20

G.SHDSL Line Interface

Number of ports

2 or 4

Line Rate for 4-channel G.shdsl

n x 64Kbps (n= 3 to 31)

Line Rate for 2-channel G.shdsl

n x 64Kbps (n= 3 to 15)

Line Code

16-TCPAM, full duplex with adaptive echo cancellation

Connector

RJ45

Electrical

Unconditioned 19-26 AWG twisted pair

Sealing current

Max. 20 MA source current

Clock Source

From System, Line

Diagnostic Test

G.SHDSL Loopback: To-LINE, To-bus

BERT: QRSS

DTE Interface (X.21)

Data Port Up to six 6-port DTE X.21 card; 1-port DTE X.21 card (future option) Data Rate 56 or 64 Kbps, n = 1 to 32 Connector DB15

DTE Interface (V.35)

Data Port Up to six 6-port DTE V.35 card Data Rate 56 or 64 Kbps, n = 1 to 32 Connector DB25S (optional conversion cable DB25S to M34 connector)

DTE Interface (V.36)

Data Port Up to six 6-port DTE V.36 card Data Rate 56 or 64 Kbps, n = 1 to 32 Connector DB25S (optional conversion cable DB25S to DB37 connector)

DTE Interface (EIA530/RS449)

Data Port Up to six 6-port EIA530 DTE card Data Rate 56 or 64 Kbps, n = 1 to 32 Connector DB25S (optional conversion cable DB25S male to DB37 female connector for RS449)

DTE Interface (RS232-X.50 mux. 5-port)

Data Port Up to six 5-port RS232 cards with X.50 plug-in, subrate, with subrate mux MUX (a) 5 independent RS232, or (b) 5 subrate RS232 (X.50) muxed to 64K

Data Rate Mode (a) 5 independent RS232: 1.2K, 2.4K, 41.2K, 2.4K, 4 .8K, 9.6K, 19.2K, 38.4K, 48K , 64K SYNC .8K, 9.6K, 19.2K ASYNC
Mode (b) 5 mux together: 1.2K, 2.4K, 4 .8K, 9.6K SYNC

Connector DB25S

DTE Interface (RS232-X.50 mux. 8-port) Data Port Up to twelve 8-port RS232 cards MUX Maximum 5 subrate port per 64K bps Data Rate Mux mode 0.6K, 1.2K, 2.4K, 4.8K, 9.6KAsynchronous Independent mode 0.6K, 1.2K, 2.4K, 4.8K, 9.6K, 19.2K Mux mode 0.6K, 1.2K, 2.4K, 4.8K, 9.6KSynchronous Independent mode 0.6K, 1.2K, 2.4K, 4.8K, 9.6K, 19.2K, 38.4K, 48K, 64K

Card Type Eight RJ48 Port Number 1 2 Async Async 3 Async 4 Async 5 Async 6 Async 7 Async 8 Async
Two DB44 + Two Connector RJ48 Async/Sync Async/Sync Async Eight RJ48 (port 1 to port 8) Async/Sy nc Async/Sync Async Async Async

DB44 (port1,port2,port3), DB44 (port4,port5,port6), RJ48 (port7) and RJ48(port8) Conversion Cable A three-into-one conversion cable adapts the DB44 connector to 3 connecters (one DB9S and two DB25S) Electrical RS232 Interface, DCE

Co-directional Interface

Interface ITU G.703 64 Kbps co-directional interface Connector 120ohm, RJ48 Line Distance Up to 500 meters Loopack DTE Payload Loopback, Local Loopback

C37.94 Interface

Source LED Wavelength 820nm 2Km reach Connector ST Optical Budget 50 Micron core/9.6 db

62.5 Mircon core/ 15db

Dry Contact Interface

Inputs -Outputs

8-channel 2-port per card, 4-pair per port 8-channel 8-pair per card Connector RJ45 Connector Screw type Internal Resistance 1 K Initial Insulation Resistance Min. 100M ohm (at 500 Vdc) Activation Current 3 ma Max. Current 5A Deactivation Current 1.5 ma Max. Voltage 100 Vdc, 250 Vac Allowable Current 4 ma

Dry Contact Type B Interface

Inputs -Outputs

8-channel 2-port per card, 4-pair per port 8-channel 8-pair per card Connector RJ45 Connector Screw type Internal Resistance 100 K Initial Insulation Resistance Min. 1000M ohm (at 500 Vdc) Activation Current 3 ma Max. Current 2A Deactivation Current 1.5 ma Max. Voltage 220 Vdc, 250 Vac Allowable Current 4 ma

Voice Card (Q2EM, Q4EM)

Connector DB44 connector with external DB44 to 4 RJ45 connector cable Alarm Conditioning CGA busy after 2.5 seconds of LOS, LOF Encoding A-law or μ-law, user selectable per card Impedance Balanced 600 ohm or 900ohmLongitudinal Conversion Loss > 46dB Longitudinal Balance > 63dB Gain Adjustment Normal mode 0, -3, -6 or +7 dB for transmit (D/A) gain (all port settings) 0, -3, -6 or +10 dB for receive (A/D) gain Signal/Distortion > 25dB with 1004 Hz, 0dBm input Frequency Response - 0.25 to -1 dB from 300 to 3400 Hz Idle Channel Noise Max. –65 dBm0p Signaling Type I, II, III, IV, V and TO (Transmit Only) signaling options (manufacture option) Side: A or B (manufacture option) Wire: 2 wire or 4 wire (manufacture option) In-band signaling tones transparent Modems Full compatibility with V.90 modems

Voice Card (8EM)

Connector Eight RJ45 Alarm Conditioning CGA busy after 2.5 seconds of LOS, LOF Encoding A-law or μ-law, user selectable together for all Impedance Balanced 600 or 900 ohms Longitudinal Conversion Loss > 46dB Longitudinal Balance > 63dB Gain Adjustment (Per-port setting) -10 to +7 dB / 0.1dB step for transmit (D/A) gain -10 to +14 dB / 0.1dB step for receive (A/D) gain I/O voice power range A/D digital input level: -66 dBm (0.00039 Vrms) ~ + 3 dBm (1.09 Vrms)

D/A analog output level: -66 dBm (0.00039 Vrms) ~ + 7 dBm (1.74 Vrms) Signal/Distortion > 25dB with 1004 Hz, 0dBm input Frequency Response - 0.25 to -1 dB from 300 to 3400 Hz Carrier connection Side A ( exchange side) and Side B (carrier side) setup by side switch Idle Channel Noise Max. –65 dBm0p wire mode 2 wire and 4 wire (programmable) Signaling Type 1, Type 2, Type 3, Type 4, and Type 5, Transmit only (programmable) Modems Full compatibility with V.90 modems All in-band signaling tones are carried transparently by the digitizing process. Customer is responsible for in-band signaling compatibility between a telephone and a switch, or between a PBX and a switch.

OCUDP Interface Card

Ports Eight Ports for each card Line Status Indicator Per Port 1 dual color LED; Red for LOS, Green for SYNC Network Connector RJ48S Electrical network connection Tip/Ring and Tip1/Ring1 Transmit Source Impedance 135 Ohms +/- 20% Receive Input Impedance 135 Ohms +/- 20% Receiver Sensitivity/ Dynamic Range 0 to 43 dB loop loss at 72K & 56K

0 to 34 all other rates Automatic line equalization

Voice Card 12 MAG (Magneto)

Connector Twelve RJ11Alarm Conditioning CGA busy after 2.5 seconds of LOS, LOF Encoding A-law or μ-law, user selectable together for all Impedance Balanced 600 or magneto telephone impedance match Longitudinal Conversion Loss > 46dB Gain Adjustment -21 to +10 dB / 0.1dB step transmit & receive Signal/ Distortion > 25dB with 1004 Hz, 0dBm input Frequency Response - 0.25 to -1 dB from 300 to 3400 Hz, coincide with ITU-T G.712 Idle Channel Noise Max. –65 dBm0p Min Detectable Ringing Voltage 16 Vrms Ringing Detectable Across L1 and L2 (Tip and Ring), L1 and GND (Tip and GND) Ringing Generation Voltage: 76 Vrms (sine wave)

Frequency: 20Hz

Cadence: 1 sec on 2 sec off, or 2 sec on 4 sec off Ringing Send Across L1 and L2 (Tip and Ring), L1 and GND (Tip and GND) Signaling Magneto MRD (Ringing across Tip and Ring or Tip and Ground) Signaling Bit A,B,C,D Programmable Signaling is carried transparently by the digitizing process. Use Magneto card default setting for communications between magneto telephones Use Magneto card PLAR mode setting for communications between a magneto telephone and a regular telephone

Conference Card (will be updated)

RS232 Interface

Data Port

2-ports per card

ASYNC Data Rate

300, 600, 1.2K, 2.4K, 4.8K, 9.6K, 19.2K

SYNC

not supported

Connector

Two DB9, DCE, female

FXS Voice Interface

Connector

Two RJ11

Encoding

G.723

Longitudinal Conversion Loss

> 46dB

Cross Talk Measure

Max -70dBm0

Gain Adjustment

transmit (D/A) gain 0, +6dB

receive (A/D) gain +6, 0, -6dB

Signal/ Distortion

> 25dB with 1004 Hz, 0dBm input

Idle Channel Noise

Max. –65 dBm0p

Loop Resistance

Max 1800 ohm

FXS Loop Feed

Normal -48 Vdc with 25mA current limit

FXS Ringing

2 REN

20Hz

76 Vrms

2 sec on / 4 sec off for 1 min, or 1 sec on / 2 sec off for 30 sec (programmable)

Signaling

Loop Start, DTMF

E&M Voice Interface

Connector

Two RJ45

Encoding

G.723

Impedance

Balanced 600 ohms

Longitudinal Conversion Loss

> 46dB

Gain Adjustment

transmit (D/A) gain 0, +6dB

receive (A/D) gain +6, 0, -6dB

Signal/Distortion

> 25dB with 1004 Hz, 0dBm input

Idle Channel Noise

Max. –65 dBm0p

Carrier Connection

Side A = exchange side, Side B = carrier side (Jumper selectable)

Phone line power+12V

Type P (Jumper enable)

Operation mode

Master, standard (Jumper selectable)

Wire Mode

4 wire

Signaling Type

Type 1, Type 4, and Type 5 (Jumper selectable)

EM Ringing

Single ringing for 5 sec only

2 sec on / 4 sec off for 1 min, or 1 sec on / 2 sec off for 30 sec (programmable)
Voice Card (QFXS, QFXO)

Connector Four RJ11 Alarm Conditioning CGA busy after 2.5 seconds of LOS, LOF Encoding A-law or μ-law, user selectable per card AC impedance Balanced 600 or 900 ohms, user selectable per card Longitudinal Conversion Loss > 46dB Loss Adjustment 0, 3, 6, or 9 dB transmit & receive, user selectable per card Signal/ Distortion > 25dB with 1004 Hz, 0dBm input Frequency Response - 0.25 to -1 dB from 300 to 3400 HzFXS Loop Feed Nominal -48 Vdc with 25mA current limit per port FXS Ringing 1 REN at 5000 meters per port

20 Hz, other frequencies (manufacture option): 16.7 Hz, 25 Hz, 50 Hz 76 Vrms (sine wave) User selectable ring cadence per card for PLAR function: 2 sec on 4 sec off, or 1 sec on 2 sec off

FXO Ringing RENRinging REN 0.5B (AC) Detectable Ringing 25 Vrms Loop Resistance 1800 ΩDC impedance (ON-HOOK) > 1M ΩDC impedance (OFF-HOOK) 235 Ω @ 25mA feed

90 Ω @ 100mA feed

Metering Pulse 12 KHz/16 KHz Power: 10dBm Sensitivity: -18dBm to -45dBm (manufacture option)

Signaling Loop Start, GND-Start, Metering Pulse (12 KHz, 16 KHz), DTMF, Dialing Pulse, PLAR, Battery Reverse (support Line Reverse Signaling for Billing) In-band signaling tones transparent

Voice Card (12FXS,12FXO,24FXS,24FXO)

Connector Twelve RJ11 Alarm Conditioning CGA busy after 2.5 seconds of LOS, LOF Encoding A-law or μ-law, user selectable together for all AC Impedance Balanced 600 or 900 ohms (selectable together for all) Longitudinal Conversion Loss > 46dB Cross talk measure Max -70dBm0 Gain Adjustment -21 to +10 dB / 0.1dB step transmit & receive Signal/ Distortion > 25dB with 1004 Hz, 0dBm input Frequency Response - 0.25 to -1 dB from 300 to 3400 Hz, coincide with ITU-T G.712 Idle Channel Noise Max. –65 dBm0p Variation of Gain ±0.5dB FXO Ringing REN 0.5B (AC)

Detectable Ringing 25 Vrms

Loop Resistance ≦1800 ΩDC Impedance (ON-HOOK) > 1M ΩDC Impedance (OFF-HOOK) 235 Ω@ 25 mA feed 90 Ω@ 100 mA feed FXS Loop Feed Normal -48 Vdc with 25mA current limit FXS signalling Normal / Automatic Ring down FXS Ringing 1 REN at 5K meters per port

16.7Hz, 20Hz, 25Hz, 50Hz, user selectable for all ports 38 to 85 Vrms (sine wave), 76 Vrms for default Ring Voltage 2 sec on 4 sec off, or 1 sec on 2 sec off optional for PLAR

Signaling Loop Start, DTMF, pulse, PLAR, Battery Reverse Optional Signaling (for special Ground Start, Metering pulse (12 KHz, 16 KHz), and P( in PLAR mode, PLAR signaling order) bits are programmable.

Signaling Bit A,B,C,D Programmable bit yAll in-band signaling tones are carried transparently by the digitizing process. yCustomer is responsible for in-band signaling compatibility between a telephone and a switch, or between a PBX and a switch.

Clock Source

Internal, E1/T1 Line, External (E1/T1/2048 KHz)

Alarm Relay

Alarm Relay, Fuse alarm, and performance alarm

System Configuration Parameters

Active Configuration, Stored Configuration, and Default Configuration (Stored in Non-volatile Memory)

Supervisor

RS232, VT100 - front panel 10 Base-T, Ethernet, SNMP - front panel
CONSOLE/SLIP - front panel In-band 64 Kbps
Performance Monitor
Performance Registers Last 24 hours performance in 15 minute intervals and last 7 days in 24 hour summaries
Separate Registers Network, user, and remote site
Performance Reports Reports include E1 Burst Errored Second, Severe Errored Second, Degraded Minutes, and
Controlled Slip Second. Also available in Statistics (%)
Alarm Queue Containing 40 alarm records which record the latest alarm type, location, and date & time
Threshold Burst Seconds, Severely Errored Second, Degraded Minutes
Diagnostics Test Line
Loopback E1/T1 interface (Line Loopback, Payload Loopback, Local Loopback)
U interface (Local Loopback, Payload Loopback)
Test Pattern E1/T1 interface (215-1 PRBS, 3-in-24, 1-in-8, 2-in-8, 1:1 patterns)
U/DTE interface (211-1 BERT)
Front Panel
LED 1 per U/V.35-interface, ACO, Power, SYNC/TEST, LOF, BPV, RAI/AIS
Physical /Electrical

AM3440-A

AM3440-B

AM3440-C

Dimensions 432.4 x 220 x 223.5 mm (W×H×D) 438 x 110 x 224 mm (W×H×D) 438 x 132 x 224 mm (W×H×D)
Power Single/ Dual -48 Vdc: -36 to -75 Vdc, 100 Watts max. Single/ Dual -48 Vdc: -36 to -75 Vdc, 150 Watts max. Single/ Dual -24 Vdc: -18 to -36 Vdc, 150 Watts max Single/ Dual -125 Vdc: -40 to -150 Vdc, 100 Watts max Single/ Dual -48 Vdc: -36 to -75 Vdc, 100 Watts max. Single AC: 100 to 240 Vac, 50/60 Hz Single/ Dual -48 Vdc: -36 to -75 Vdc, 100 Watts max. Single AC: 100 to 240 Vac, 50/60 Hz
Temperature 0-50°C 0-50°C 0-50°C
Humidity 0-95%RH (non-condensing) 0-95%RH (non-condensing) 0-95%RH (non-condensing)
Mounting Desk-top stackable, 19” /23” rack mountable Desk-top stackable, 19” /23” rack mountable Desk-top stackable, 19” /23” rack mountable
Line Power Supply Available only with DC power for G.SHDSL card only N/A N/A
Power Consumption Max 110 Watts Max 45 Watts Max 57 Watts


 

TRANSLATE THIS WEBSITE
INTO YOUR PREFERRED LANGUAGE


| Home | Products Search | Order | email |

National Datamux 2009. - All products, logo's and brand names mentioned are trademarks or registered trademarks of their respective owners.