LOOP-C5500 Integral Access Shelf

Features:
  • Space for 16 plug-in cards.
  • Accepts cards of types:
    Loop-E1500-IR Fractional E1 CSU/DSU
    Loop-H3300-R G.SHDSL
  • Shared common controller card allows front panel operation.
  • 2-line by 40-character LCD display
  • Ethernet port for out-of-band management.
  • Connection to SNMP and Telnet.
  • Supports SNMP Version 1
  • Compatible to LoopView, a GUI network management system.
Description:

Loop-C5500 is an Integral Access Shelf designed to accept a mix of Loop series rack cards. This includes
Loop-E which is fractional E1 products and Loop-H, which is an HDSL or G.SHDSL interfaces.
Innovative power supply solution: implemented in C5500 chassis: each card has its own power adapter
from DC to needed board voltages (12/5 Vdc). The chassis has 2 input 48 Vdc power supply connectors;
backplane has 2 independent power supply circuits. For full redundancy, customer may use 2 DC power supplies
(48 DC carrier batteries) or 1+1 external adapters with 230 Vac and 48 Vdc.
Loop-C5500 Integral Access Shelf supports local configuration and diagnostics using keypads and LCD
display on the front panel, or from a local or remote terminal. Each rack position can be individually
addressed and the type of plug-in identified. This enables users to execute in-service diagnostics and
fault isolation. Using Ethernet, SLIP, SNMP, or Telnet connection on the shared controller card of the rack unit,
users can remotely control and diagnose Loop rack cards from a centralized location. In addition to
commercial management systems, a graphical user interface (GUI) based network management system, LoopView, is also available from Loop.

Ordering Information

For a complete system, order one controller and one Integral Access Shelf, and
as many plug-in types as needed up to 16.
To specify options, choose from list below:
Note: RoHS compliant units are identified by the letter G appearing immediately at the end of ordering code.

C5500 Specs Sheet


Enter and submit form and we will contact you straight away:

onsubmit="return jcap();" name="C5500 Request Form">

 Please specify the Brand and Model Number:

* Brand & Model
* Product type (modem, router, etc.)
Part # (if available):
*Qty.
Specs/Features/Description

 *I am the End User Reseller (tax-ID required at time of purchase)

Describe your application requirements with as much detail as possible:   

  Contact  Information - Our Privacy Policy is: We do not sell, trade, give or share information
   provided to us to anyone.

    First Name: Last Name: Title: 
    Company:   Mail Stop:   

    Address:    
    City:            State: Postal Code:  Country:
    Telephone: FAX:   
    Email:         URL:   

Enter the code below as it is shown:

    


Supervisory Ports on a Shared Controller Card
Connector DB9 at front DB25 at rear RJ-45 (SNMP-2) at front RJ-45 (SNMP-1) at rear
Electrical RS232 (DCE) RS232 (DCE) 10/100 Base-T Ethernet 10/100 Base-T
Ethernet
Protocol VT-100 menu driven SLIP/Telnet Telnet/SNMP* Telnet/SNMP*
* = Support SNMP v.1
Front Panel
Keypad on Controller Card 5 keys: Left arrow, Right arrow, ESC, ENTER, and ACO (Alarm Cut-Off)
LCD/LED on Controller Card 2-lines by 40 character LCD, One LED for ACO,
LEDs (LINK/ACT, 10/100) for SNMP-1,
LEDs (LINK/ACT, 10/100) for SNMP-2
Fans on the Shared Controller Card
Fans 4, Included, operation controlled by thermostat on board.
On temperature 45°C
Off temperature 33°C
Alarm temperature 68°C
Front panel of Loop-C5500-CC-SNMP CONSOLE 9600.n.8.1
SLOT 1 SLOT 2 SLOT 3 SLOT 4 SLOT 5 SLOT 6 SLOT 7 SLOT 8 SLOT 9 SLOT 10 SLOT 11 SLOT 12 SLOT 13 SLOT 14 SLOT 15 SLOT 16
ENTER
E S C
ACO
Supervisory Ports on a Shared Controller Card
Connector RJ-11 at front DB25 at rear RJ-45 at rear
Electrical RS232 RS232 10 Base-T Ethernet
Protocol VT-100 menu driven SLIP/Telnet/SNMP* Telnet/SNMP*
* = Support SNMP v.1
Front Panel
Keypad on Controller Card 5 keys: Left arrow, Right arrow, ESC, ENTER, and ACO (Alarm Cut-Off)
LCD/LED on Controller Card 2-lines by 40 character LCD, one LED for ACO
Fans on the Shared Controller Card
Fans 2, Included, operation controlled by thermostat on board.
On temperature 48°C
Off temperature 33°C
Alarm temperature 58°C

Electrical
Power (pp=DC) -36 to -56 Vdc, 2 input connectors, 2 power supply circuits on
backplane of the chassis
Power (pp= APA150, APE150 or APU150)* Input Range 85 to 264 Vac
Output Voltage 45.6 to 52.8 Vdc.
Output Current 3.2 A Max.
Output Power 150 Watt Max.
Note:”*” -Options for AC power supplies.
-For redundancy, 2 adapters are needed.
Physical and Environmental
Dimensions 433x 220.5 x 272.8 mm (WxHxD) for DC only
433x 220.5 x 320 mm (WxHxD) for DC with attached AC to DC adaptor on rear panel
Note: each rack cage can have 16 plug-in units, plus controller card
Temperature 0 - 50°C
Humidity 0-95% RH (non-condensing)
Mounting Desk-top stackable, 19/23 inch rack mountable, accessories included
Number of slots 16
Card Types Accepted
Loop-E1500-IR Fractional E1 CSU/DSU Data rate N x 64 Kbps, N=1 to 32 (64K to 2048 Kbps)
Loop-H3300-R G.SHDSL Data rate N x 64 Kbps, N=1 to 72 (64K to 4608 Kbps)
Power Consumption
Controller card 5 Watt
E1500-IR 5 Watt
H3300-R 8 Watt
H3300-R with sealing current 10 Watt
H3300-R with line power 16 Watt
Certification
Lightning Surge: IEC 1000-4-5
EMC: Class A of Subpart B of FCC Part 15
Vibration: FCC part 68.302
Safety: IEC60950


 

TRANSLATE THIS WEBSITE
INTO YOUR PREFERRED LANGUAGE


| Home | Products Search | Order | email |

National Datamux 2009. - All products, logo's and brand names mentioned are trademarks or registered trademarks of their respective owners.