Digitel DT SHDSL Specifications Page

Operation

  • Point to point, synchronous, full-duplex,
    NTU or LTU

Operation Modes

  • 2-wire, 4-wire and automatic/manual backup

Type of Line

  • Pair of 135 Ohms balanced wire (RJ45)

Output Power

  • Nominal: 14dBm

Output Impedance

  • 135 Ohms

Line Coding

  • TC-PAM 32

Interfaces

  • G.703 (BNC/75Ohms or RJ45/120 Ohms)

  • V.35 (DB25 connector- ISO 2110)

Clock

  • Internal

  • Regenerated

  • Slave

Management

  • Local Management: VT100/RS-232

  • Remote Management: VT100 (EOC) or SNMP

  • AMC/AMDII at the central site

Indicators

  • Power: Power Supply

  • TD/RD: Data IN/OUT

  • G.703: Enabled interface

  • V.35: Enabled interface

  • SYNC2: (DT SHDSL C/4W) Line 2 synchronized

  • Alarm: Alarm conditions

  • Test: Test activity

Test/ Loop

  • LDL- Local Digital Loop

  • LAL- Local Analog Loop

  • RDL- Remote Digital Loop

  • BERT

Power Supply

  • AC: Full-range 93.5 to 253VRMS, 47 to 63 Hz

  • DC: -48VDC (-36 to 60 VDC)

Consumption

            6w

Dimensions

  • Height: 40mm

  • Width: 230mm

  • Depth: 157mm

  • Approximate weight: 490g

Environment

  • Operation: 0 to 45 C

  • Storage: -5 to 65 C

  • Transport: -40 to 70 C

  • Relative humidity: up to 95%

Standards

  • ITU-T G.991.2 (2003)

  • ITU-T G.994.1 (2003)

  • ITU-T G.703

  • ITU-T G.704

  • ITU-T V.35

Information to Order

            DT SHDSL C/S- 2-wire only

            DT SHDSL C/4W/S- 2/4 wire





 

TRANSLATE THIS WEBSITE
INTO YOUR PREFERRED LANGUAGE


| Home | Products Search | Order | email |

National Datamux 2009. - All products, logo's and brand names mentioned are trademarks or registered trademarks of their respective owners.